There are many types of raincoats, and the maintenance methods are also different. Let’s introduce the maintenance methods of rubber raincoats and plastic raincoats.
The maintenance of rubber raincoats
1. Storage method of rubber raincoat
When storing the rubber raincoat, you can line the newspaper in the interlayer, or sprinkle a layer of prickly heat powder and then fold it, so that it will not stick after a long storage time.
2. Rubber raincoat peculiar smell removal method
When the rubber raincoat has a peculiar smell, you can mix hydrogen peroxide into clean water to soak the raincoat, and the peculiar smell will disappear after drying.
The maintenance of plastic raincoats must be decided
1. Plastic raincoat wrinkle removal method
Slight wrinkles appear on the raincoat, which can be hung on a hanger to let it naturally return to level. If the wrinkles are tight, soak the raincoat in hot water at about 70°C for 2 minutes. After removing it, place it on a flat plate and flatten it. Then wipe off the water stains to restore the smoothness. Be careful not to pull it hard.
2. Plastic raincoat sticking method
If the plastic raincoat is broken, you can align the breaks first, place a piece of cellophane on it, and press it on it with a hot iron rod a few times. Do not press down too long each time, so that the cellophane will not be burnt, while the plastic underneath It’s glued. The hole can be cut with the same plastic cloth into a square or round piece slightly larger than the hole, cover the hole, then cover with cellophane, and heat and paste it in the same way.
